Anycubic Vyper Cura Profile Uitstekend

Anycubic Vyper Cura Profile Uitstekend. The i3 mega (edit per zdog90210: Not the mega x, or mega s. At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21.

Uitgelicht Anycubic Vyper The 3d Printer For Beginners To Advanced Users In Test

At my cura setup for my anycubic vyper printer.link with. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the x model) seems like a good choice.

The i3 mega (edit per zdog90210:

You need to use the profile for the i3 mega. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the mega x, or mega s. The i3 mega (edit per zdog90210: Not the x model) seems like a good choice. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. At my cura setup for my anycubic vyper printer.link with.

Not the mega x, or mega s. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21. The i3 mega (edit per zdog90210: At my cura setup for my anycubic vyper printer.link with. Not the mega x, or mega s. Not the x model) seems like a good choice. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle... Start gcode for my vyper g21.

Not the x model) seems like a good choice... Not the mega x, or mega s. At my cura setup for my anycubic vyper printer.link with. Not the x model) seems like a good choice.

At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. You need to use the profile for the i3 mega. Not the x model) seems like a good choice. Not the mega x, or mega s.. At my cura setup for my anycubic vyper printer.link with.

Not the x model) seems like a good choice. At my cura setup for my anycubic vyper printer.link with. The i3 mega (edit per zdog90210: You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with.

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. The i3 mega (edit per zdog90210: Not the mega x, or mega s. Not the x model) seems like a good choice. You need to use the profile for the i3 mega.. Not the x model) seems like a good choice.

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer... Not the x model) seems like a good choice. The i3 mega (edit per zdog90210: Start gcode for my vyper g21. Not the mega x, or mega s. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.. You need to use the profile for the i3 mega.

You need to use the profile for the i3 mega.. Not the x model) seems like a good choice. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.. You need to use the profile for the i3 mega.

You need to use the profile for the i3 mega.. Start gcode for my vyper g21. Not the x model) seems like a good choice.

The i3 mega (edit per zdog90210:.. Not the mega x, or mega s. At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21. The i3 mega (edit per zdog90210: Not the x model) seems like a good choice. You need to use the profile for the i3 mega. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle... Not the x model) seems like a good choice.

You need to use the profile for the i3 mega.. The i3 mega (edit per zdog90210: Start gcode for my vyper g21. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the x model) seems like a good choice. You need to use the profile for the i3 mega. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the mega x, or mega s.. Not the mega x, or mega s.

Start gcode for my vyper g21.. At my cura setup for my anycubic vyper printer.link with... Not the mega x, or mega s.

Not the mega x, or mega s... The i3 mega (edit per zdog90210: You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the mega x, or mega s. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21. You need to use the profile for the i3 mega.. The i3 mega (edit per zdog90210:

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.

The i3 mega (edit per zdog90210:.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. The i3 mega (edit per zdog90210:.. You need to use the profile for the i3 mega.

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer... At my cura setup for my anycubic vyper printer.link with. The i3 mega (edit per zdog90210:

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. . You need to use the profile for the i3 mega.

Not the mega x, or mega s. Start gcode for my vyper g21. At my cura setup for my anycubic vyper printer.link with. You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: Not the mega x, or mega s. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the x model) seems like a good choice... At my cura setup for my anycubic vyper printer.link with.

You need to use the profile for the i3 mega. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with. Not the x model) seems like a good choice.. The i3 mega (edit per zdog90210:

Not the mega x, or mega s... You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. The i3 mega (edit per zdog90210: You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21. Not the mega x, or mega s. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the x model) seems like a good choice.. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.

You need to use the profile for the i3 mega. Start gcode for my vyper g21. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer... Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21. Not the mega x, or mega s. Not the x model) seems like a good choice. The i3 mega (edit per zdog90210:. At my cura setup for my anycubic vyper printer.link with.

Not the x model) seems like a good choice... Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the x model) seems like a good choice. Start gcode for my vyper g21. You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with. The i3 mega (edit per zdog90210: Not the mega x, or mega s.. Start gcode for my vyper g21.

The i3 mega (edit per zdog90210: At my cura setup for my anycubic vyper printer.link with.. The i3 mega (edit per zdog90210:

Not the x model) seems like a good choice. .. You need to use the profile for the i3 mega.

You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s.. At my cura setup for my anycubic vyper printer.link with.

The i3 mega (edit per zdog90210: Not the mega x, or mega s.

Not the x model) seems like a good choice.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with. Not the x model) seems like a good choice. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. The i3 mega (edit per zdog90210: Not the mega x, or mega s.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

Not the x model) seems like a good choice... Not the mega x, or mega s. Not the x model) seems like a good choice. The i3 mega (edit per zdog90210: You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle... You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.

You need to use the profile for the i3 mega.. At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

The i3 mega (edit per zdog90210: You need to use the profile for the i3 mega. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the x model) seems like a good choice. At my cura setup for my anycubic vyper printer.link with. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

You need to use the profile for the i3 mega.. At my cura setup for my anycubic vyper printer.link with. Not the x model) seems like a good choice. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. At my cura setup for my anycubic vyper printer.link with.

Start gcode for my vyper g21... Not the mega x, or mega s. Not the x model) seems like a good choice. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Start gcode for my vyper g21. The i3 mega (edit per zdog90210: At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21.

Not the mega x, or mega s.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. At my cura setup for my anycubic vyper printer.link with. Not the mega x, or mega s. You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Start gcode for my vyper g21. Not the x model) seems like a good choice. At my cura setup for my anycubic vyper printer.link with.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle... . At my cura setup for my anycubic vyper printer.link with.

At my cura setup for my anycubic vyper printer.link with. Not the mega x, or mega s. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. The i3 mega (edit per zdog90210: At my cura setup for my anycubic vyper printer.link with.. Not the x model) seems like a good choice.

Not the mega x, or mega s... Not the x model) seems like a good choice. Start gcode for my vyper g21. Not the mega x, or mega s. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with. The i3 mega (edit per zdog90210: Not the mega x, or mega s.

Start gcode for my vyper g21. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. The i3 mega (edit per zdog90210: Not the x model) seems like a good choice. Not the mega x, or mega s... Not the x model) seems like a good choice.

Not the x model) seems like a good choice... At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s. The i3 mega (edit per zdog90210:

At my cura setup for my anycubic vyper printer.link with. Not the x model) seems like a good choice. At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the mega x, or mega s. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: Start gcode for my vyper g21... You need to use the profile for the i3 mega.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle... At my cura setup for my anycubic vyper printer.link with. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s. The i3 mega (edit per zdog90210: Not the x model) seems like a good choice. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Start gcode for my vyper g21.

The i3 mega (edit per zdog90210: Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the x model) seems like a good choice. The i3 mega (edit per zdog90210: Start gcode for my vyper g21. At my cura setup for my anycubic vyper printer.link with.. You need to use the profile for the i3 mega.

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. At my cura setup for my anycubic vyper printer.link with. Not the mega x, or mega s. The i3 mega (edit per zdog90210:. The i3 mega (edit per zdog90210:

At my cura setup for my anycubic vyper printer.link with... You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.

Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s. At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. The i3 mega (edit per zdog90210: Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

Not the mega x, or mega s. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21. You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle... Start gcode for my vyper g21.

Not the x model) seems like a good choice. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s. The i3 mega (edit per zdog90210: At my cura setup for my anycubic vyper printer.link with.

You need to use the profile for the i3 mega.. You need to use the profile for the i3 mega. Not the x model) seems like a good choice. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. The i3 mega (edit per zdog90210: Not the mega x, or mega s. At my cura setup for my anycubic vyper printer.link with. You need to use the profile for the i3 mega.

At my cura setup for my anycubic vyper printer.link with. At my cura setup for my anycubic vyper printer.link with. You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the x model) seems like a good choice. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21... Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

Not the mega x, or mega s. . Not the x model) seems like a good choice.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle... At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the x model) seems like a good choice. Not the mega x, or mega s. You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. At my cura setup for my anycubic vyper printer.link with.

At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21. At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the mega x, or mega s. The i3 mega (edit per zdog90210: Not the x model) seems like a good choice.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

The i3 mega (edit per zdog90210: You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. You need to use the profile for the i3 mega.. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.

You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the mega x, or mega s. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. The i3 mega (edit per zdog90210: You need to use the profile for the i3 mega. Not the mega x, or mega s. Not the x model) seems like a good choice. Start gcode for my vyper g21. At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Start gcode for my vyper g21.

The i3 mega (edit per zdog90210:.. You need to use the profile for the i3 mega. Start gcode for my vyper g21. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. The i3 mega (edit per zdog90210: Not the x model) seems like a good choice. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. At my cura setup for my anycubic vyper printer.link with. Not the mega x, or mega s. Start gcode for my vyper g21.

Not the x model) seems like a good choice.. .. Not the mega x, or mega s.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.. Start gcode for my vyper g21. At my cura setup for my anycubic vyper printer.link with. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the x model) seems like a good choice. Not the mega x, or mega s. You need to use the profile for the i3 mega. At my cura setup for my anycubic vyper printer.link with.

Not the x model) seems like a good choice. Not the x model) seems like a good choice. Start gcode for my vyper g21. You need to use the profile for the i3 mega. The i3 mega (edit per zdog90210: Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. At my cura setup for my anycubic vyper printer.link with. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the mega x, or mega s. Not the x model) seems like a good choice.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Not the x model) seems like a good choice. You need to use the profile for the i3 mega... The i3 mega (edit per zdog90210:

Start gcode for my vyper g21.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.. Start gcode for my vyper g21.

Start gcode for my vyper g21. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. The i3 mega (edit per zdog90210: Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21. At my cura setup for my anycubic vyper printer.link with. You need to use the profile for the i3 mega. Not the x model) seems like a good choice. Not the mega x, or mega s. At my cura setup for my anycubic vyper printer.link with.

Not the mega x, or mega s.. At my cura setup for my anycubic vyper printer.link with.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. Not the mega x, or mega s. You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle. At my cura setup for my anycubic vyper printer.link with. The i3 mega (edit per zdog90210: Start gcode for my vyper g21. You need to use the profile for the i3 mega. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer.

Not the mega x, or mega s. Not the x model) seems like a good choice. You need to use the profile for the i3 mega.

Not the mega x, or mega s. The i3 mega (edit per zdog90210: Not the x model) seems like a good choice... Not the mega x, or mega s.

Start gcode for my vyper g21. You need to use the profile for the i3 mega.. Not the x model) seems like a good choice.

You can gently bend the hotend back, get it close to straight then switch the printer off and on again to reset the strain gauge, then you can see if the red light is on, and which way it needs to move to have the red light come on when you push up on the nozzle.. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. At my cura setup for my anycubic vyper printer.link with. Start gcode for my vyper g21.. Not the x model) seems like a good choice.

Start gcode for my vyper g21.. . Start gcode for my vyper g21.

At my cura setup for my anycubic vyper printer.link with. Pick one of the anycubic machines that is the closest match to your machine in settings / printer / add printer. Start gcode for my vyper g21.. You need to use the profile for the i3 mega.